Universal Ovens – “U” Series :

• Interior and Exterior both made of Stainless Steel.
• 32 different models.
• 8 model sizes from 32 liters to 749 liters.
• 2 model variants: SingleDISPLAY and TwinDISPLAY.
• Temp range up to +300°C.
• All round heating on all 4 sides for excellent temperature homogeneity.
• Natural Convection (N) of Forced Air Circulation (F).
• Pre-warming of fresh air.
• AtmoCONTROL software.
• Calibration certificate at +160°C provided as standard.
• Various accessories available as option on request.

Incubators – “I” Series :

• Interior and Exterior both made of Stainless Steel.
• 32 different models.
• 8 model sizes from 32 liters to 749 liters.
• 2 model variants: SingleDISPLAY and TwinDISPLAY.
• Temp range up to +80°C.
• All round heating on all 4 sides for excellent temperature homogeneity.
• Natural Convection (N) of Forced Air Circulation (F).
• Prewarming of fresh air.
• Double Door (interior Glass, Exterior Stainless Steel).
• Activation of Sterilisation routine via ControlCOCKPIT (INplus/IFplus).
• AtmoCONTROL software for programming and documenting.
• Various accessories available as option on request.

Sterilisers – “S” Series :

• Interior and Exterior both made of Stainless Steel.
• 32 different models.
• 8 model sizes from 32 liters to 749 liters.
• 2 model variants: SingleDISPLAY and TwinDISPLAY.
• Temp range up to +250°C.
• All round heating on all 4 sides for excellent temperature homogeneity.
• Natural Convection (N) of Forced Air Circulation (F).
• Prewarming of fresh air.
• AtmoCONTROL software.
• Various accessories available as option on request.

Vacuum Ovens – “VO” Series :

• Interior and Exterior both made of Stainless Steel.
• 3 different models sizes: 29, 49 & 101 litres.
• Multi-function fuzzy supported control.
• Temp range up to +200°C.
• Pressure range: 10 to 1100 mbar.
• Digital electronic pressure control.
• Thermo shelves can be controlled separately (Multi-Level-Heating).
• Anti – splinter VDA tested door construction.
• Pump module with chemical resistant diaphragm pump as option.
• Calibration certification available at +160 °C, 50 mbar fir each thermoshelf.
• Various accessories available as option on request.

Peltier Cooled Incubators – “IPP” Series :

• Interior and Exterior both made of Stainless Steel.
• Heating and cooling based on unique PELTIER technology.
• 5 different model sizes: 32, 53, 108, 256 & 749 litres.
• 2 model variants: SingleDISPLAY and TwinDISPLAY.
• Temperature range 0 °C up to +70 °C.
• Reduced power consumption – No Compressor.
• Hardly any vibration & noise, No condensation inside chamber.
• Ideal for processes and test close to ambient temperature.
• Calibration certificate at +10 °C and + 37 °C.
• AtmoCONTROL software for programming and documenting.
• Double Door (interior Glass, Exterior Stainless Steel).
• Various accessories available as option on request.

Compressor Cooled Incubators – “ICP” Series :

• Interior and Exterior both made of Stainless Steel.
• 5 different model sizes: 53, 108, 256, 449 & 749 litres.
• 1 model variant: TwinDISPLAY.
• Temperature range -12 °C up to +60 °C.
• Air jacketed temperature control system.
• Double Door (interior Glass, Exterior Stainless Steel).
• Sophisticated ventilation technology ensuring good air circulation.
• Intelligent defrosting system.
• Calibration certificate at +10 °C and +37 °C.
• Various accessories available as option on request.

CO2 Incubator – “INCOmed” Series :

• Interior and Exterior both made of Stainless Steel.
• Classified as class lla medical device.
• 3 different model sizes: 108, 153 & 246 litres.
• Prices control of temperature, humidity, CO2 optional O2 content.
• Temp Range up to +50 °C.
• Heating on all 6 sides including door and rear side.
• State of the art control technology, Electronic humidity limit control.
• 7 additional optional modules for features expansion.
• Facility to sterilize interior using STERICard.
• Sterilisation without removing any sensors.
• Calibration facility for temperature, CO2 and humidity on the controller.
• Various accessories available as option on request.

Constant Climate Chamber – “HPP” Series :

• Interior and Exterior both made of Stainless Steel.
• 3 different model sizes: 108, 256 & 749 litres.
• 1 model variant: TwinDISPLAY, Temperature range up to +70 °C.
• Digitally controlled active humidification & dehumidification 10% to 90% rh.
• Double Door (interior Glass, Exterior Stainless Steel).
• Vibration free as unique PELTIER technology is used.
• Option with LED light available for all chambers.
• Capacitive type humidity sensor.
• AtmoCONTROL software for programming and documenting.
• Various accessories available as option on request.

Humidity Chamber – “HCP” Series :

• Interior and Exterior both made of Stainless Steel.
• 3 Different model sizes: 108, 153 & 246 litres.
• Digitally controlled active humidification & dehumidification 20% to 95% rh.
• Temp range up to +90 °C with humidity, up to + 160 °C without humidity.
• 6 side heating – Condensation free.
• State of the art control technology.
• Humidity limit control as standard.
• Double Door (interior Glass, Exterior Stainless Steel).
• Facility to sterilize interior using STERICard.
• Sterilisation without removing any sensors.
• Various accessories available as option on request.

Climatic Stability Test Chamber – “ICH” Series in accordance with GMP ICH :

• Interior and Exterior both made of Stainless Steel.
• 3 Different model sizes: 108, 256 & 749 litres.
• Temperature range: +10 °C up to +60 °C (with humidity).
• Temperature range: -10 °C up to +60 °C (without humidity).
• Models with light simulation & CO2 control also available for above sizes.
• 1 model variant - : TwinDISPLAY.
• Double door as standard, Air jacket thermostating system.
• Capacitive type humidity sensor.
• Large illumination area with outstanding light homogeneity (model ICH L).
• Validatable software according to FDA 21 CFT Part 11 available as option.
• Various accessories available as option on request.

Temperature / Climatic Test Chamber – “TTC / CTC” Series :

• Interior and Exterior both made of Stainless Steel.
• 1 model of 256 litres capacity.
• Temp range -42 °C to + 190 °C without humidity.
• Humidity range 10 % to 98 % in temp range of +10 °C to + 95 °C.
• Average cooling speed 3 K/min (+180 °C to -40 °C).
• Average heating speed 10 K/min (-40 °C to + 180 °C).
• Automatic defrosting system provided for the evaporator.
• State of the art perfect class control technology.
• Electronically controlled active humidification and dehumidification from 10 – 98 % rh.
• Capacitive type humidity sensor, Adjustable high performance air fan.
• Various accessories available as option on request.

Cooled Storage Incubator “IPS” Series :

• Interior and Exterior both made of Stainless Steel.
• 2 different model sizes 256 & 749 litres.
• Temp range +14 °C to +45 °C.
• 1 model variant: SingleDISPLAY.
• Double doors as standard: Prevention of contamination and drops in temperature, and at the same time an optimal view of the load through fully glazed interior doors.
• AtmoCONTROL software.
• Fan integrated in the Peltier elements ensures rapid energy transfer and optimal temperature distribution.
• Ideal for storage of samples in food, cosmetic, medicine and pharma industry.
• Various accessories available as option on request.

Water and Oil Bath – “W” & “O” Series :

• Water Bath – 13 different models.
• 6 different model sizes 7, 10, 14, 22, 29 & 45 litres.
• 2 Controller classes – Basic (B) and Excellent (E).
• Heating on 3 sides for excellent temperature homogeneity.
• Temp range up to + 95 °C and boiling mode.
• Circulation pump optional for both of 45 Litres.
• Oil Bath – 6 different models sizes 7, 10, 14, 22, 29 & 45 litres.
• Excellent class controller.
• Heating on 3 sides for excellent temperature homogeneity.
• Temp range up to +200 °C
• Optional Peltier cooling device available.
• Flat & gable lid, floor grid, shaking device etc. available as option.
• Accessories available on request.

Clean Room Drying Oven :

• intuitive and easy-to-use operating menu
• air exchange rates and air flap position electronically controllable
• temperature and air exchange ramps programmable via AtmoCONTROL software (models with TwinDISPLAY)
• pre-heated fresh air prevents temperature fluctuations
• almost exclusive use of high-quality, corrosion-resistant and easily cleanable stainless steel for the working chamber and housing
• Heating concept specifically adapted for a precise and homogenous temperature control
• a wide range of options for programming and documentation using interfaces, integrated data logger and Software AtmoCONTROL
• 3 years guarantee worldwide

Pass Through Oven :

• Interior and Exterior both made of Stainless Steel.
• 2 model sizes: 256 & 749 litres.
• Controller – Perfect Class.
• Adjustable Forced Air Circulation.
• Temp range up to +220 °C.
• All round heating on all 4 sides for excellent temperature homogeneity.
• Two doors provided one on front and one at the back.
• Can be equipped with lateral feed through accommodating deflection rollers for a quick throughput when manufacturing electronic components.
• Calibration certificate provided at +160 °C as standard.
• Various accessories available as option on request.